Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 485 / 573

Appendix A
Data Conversion
476
Conversion result, error message and corrective action
Status before
Conversion
Status after
Conversion
Error Message Corrective Action
–– Touch switch posi-
tion and size may
change. –– Correct the touch switch
position and size as
needed. (Refer to 6-8
Touch Switches)
Correction related to a touch switch for which a pop-up window/keyboard function is set
If a touch switch assigned the pop-up window/keyboard function is converted be-
tween a conventional and a new model, conversion is executed in the manner
shown below due to differences in the range of screen numbers of the touch
switch window/keyboard screen.
Difference
New models: Screen numbers of window/keyboard screen:
1 to 3999
Conventional models: Screen numbers of window/keyboard screen:
1900 to 1979
Conversion result, error message and corrective action
Status before
Conversion
Status after
Conversion
Error Message Corrective Action
With a new model,
the touch switch for
which a pop-up win-
dow/keyboard func-
tion is set is regis-
tered to the symbol
manager. With a conventional
model, the window/
keyboard screen
number is corrected
to 1900. Input Key-Window/
Keyboard screen
number is not within
the valid range.
Minimum value re-
stored. Create the window/key-
board screen for a
screen number in the
range 1900 to 1979 and
correct the window/key-
board screen number
set for the touch switch
accordingly. (Refer to
5-4 Window/Keyboard
Screens and 6-8-4 Pop-
up Window/Keyboard
Function Touch Switch.)
Correction related to the touch switch for which the copy function is set
If a touch switch assigned the copy function is converted between a conventional
and a new model, conversion is executed in the manner shown below due to dif-
ferences in the range of numeric values that can be input.
Difference
New models: As a constant for the copy setting function, a numeric
value of up to 10 digits can be input.
Conventional models: As a constant for the copy setting function, a numeric
value of up to 8 digits can be input.
Conversion result, error message and corrective action
Status before
Conversion
Status after
Conversion
Error Message Corrective Action
With a new model,
a touch switch for
which the copy set-
ting function is set
with a numeric val-
ue greater than
100000000 or
smaller than
–10000000 speci-
fied is registered to
the symbol manag-
er. With a conventional
model, a value
greater than
100000000 is cor-
rected to 99999999
or a value smaller
than –10000000 is
corrected to
F0000000. [W]
Constant Value is
out of limit. Maxi-
mum value re-
stored. Correct the screen data
or the program in the
host so that a constant
of up to 8 digits suffices.
(Refer to 6-8-6 Copy
Setting Touch Switch.)