Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 160 / 573

6-2 Section Fixed Display
147
NT20, NT20S, NT21: 32 characters
NT30, NT30C, NT31, NT31C: 40 characters
NT600S, NT620S, NT620C/NT625C, NT631, NT631C: 80 characters
To display “\”, input two characters without a blank, like “\\”.
It is possible to insert mark data, image data into a character string.
(For NT20, NT20S, NT600S, mark data can be used only in strings.)
Note that insertion of image data is possible only for the NT30, NT30C,
NT620S, NT620C, NT625C, NT21 (NT20/30/620-compatible mode),
NT31/C-V2 (NT20/30/620-compatible mode) and NT631/C-V2
(NT20/30/620-compatible mode). Although the NT21, NT31, NT31C, NT631,
and NT631C support image data, it cannot be inserted into a character string.
The procedure for inserting mark data, image data into a character string is
shown below.
(1) In the character string input field, move the cursor ( | ) to the mark/image data
insertion position.
(2) Select or in the dialog box.
The mark selection dialog box or image selection dialog box is displayed.
Select the mark data, image data to be inserted and click on .
Mark data: FF20 to FFFFH (FF20 to EF5FH for NT11S/NT11,
NT20, NT20S and NT600S)
Image data: Only for the NT30, NT30C, NT620S, NT620C, NT625C, NT21, and
NT31/631-V2 and above with NT20/30/620-compatible mode
FE20 to FEFFH
Example: Mark data
(3) The code of the specified data is displayed at the data insertion position in
the character string input field.
(4) Click on to close the character string attribute. The set mark data,
image data, or library data is displayed in the character string displayed on
the screen.
6-2-8 Tiling
The closed area of the graphic (inside the border) will be filled with some pattern
and color.