Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 176 / 573

6-3 Section Alarm
163
displayed on PT while the whole data is displayed on the Support Tool. Be sure to
set image/library data display area so that image/library data fits inside it.
For an alarm list element, the property settings, bit memory table, and charac-
ter string memory table (string table) are related to each other as shown below.
:FE20
:0001000
10
11
12
13
ABC
DEF
GHI
JKL
FE20
ABC
Table Entry No.: Set for Start Bit
Table Entry
Alarm list
Displayed
at ON
Bit memory table
Character string memory
table entry (String table):10
Image/library data
PC (PLC) address
Character string
memory table
(String table)
Image data
Specified PC
(PLC) bit
Number of bits; Set for No. of Bits
Referenced
An alarm list element is used in combination with bit memory table entries. How
they function is shown below:
Setting at bit memory table
Setting at Set dialog box
PLC Address
Setting at Function dialog box
History
Screen No.
Switch Screen
Screen No.
String Table Entry
Image/Library Code
Use of image/library data
Image/library code
Color
Property settings for alarm list element
Start Bit Table Entry
No. of Bits Referenced
The setting for the [Switch Screen] bit memory table setting differs between the
NT30, NT30C, NT620S, NT620C, and NT625C, and the NT21, NT31, NT31C,
NT631, and NT631C as shown below.
NT30, NT30C, NT620S, NT620C, and NT625C:
Specifies whether or not the screen is switched at the same time the PC
(PLC) bit allocated to bit memory table entry goes ON.