Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 414 / 573

9-3 Section Creating the Sample Data
402
Setting the pop-up display range frame
Set the range for pop-up display.
(1) Move the range specifying frame, displayed at the upper left section in the
screen, to the numeric key area and adjust its size so that the keys and tem-
porary input field are enclosed.
For details of changing the size and the position of pop-up display frame,
refer to 5-4 Window/Keyboard Screens.
9-3-13 Saving the Created Data
(1) Select [File] (menu bar)
→
[Save As]. (Refer to 4-2-10 Saving the Screen
Data (Application) to a File.)
(2) Specify the file name of the file where the created data is saved (example:
SAMPLE.ONW) and click on .
9-3-14 Downloading to the PT
Setting the PT status control area and PT status notify area
(1) Select [Tools] (menu bar)
→
[PT Configuration].
(2) Click the [Control/Notify Area] tab and set the properties as shown below.
(For details of Control/Notify area, refer to 3-3-1 Creating New Screen Data
(Application) File.)
PT Control Area PC (PLC) Address D00100
Comments Control Area
PT Notify Area PC (PLC) Address D00110
Comments Notify Area
Downloading to the PT
(1) Place the PT in the [transfer mode] by the system menu operation.
(2) At the Support Tool, select [Connect] (menu bar)
→
[Download (NT-series
Support Tool
→
PT)]
→
[Application].