Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 235 / 573

6-8 Section Touch Switches
222
Guidance
When a cursor moving touch switch is pressed, input is enabled at the speci-
fied (or associated) input field.
Settings shown below can be made only with the NT21 and with the NT31,
NT31C, NT631, and NT631C “-V1” and above.
Local 2
Window Position
Replace Local Window
If a cursor moving touch switch is created automatically at the creation of a nu-
meral/(character) string input element, the touch switch is created overlapping
the input field.
It is possible to specify a window (keyboard) for a cursor moving touch switch.
This specification enables display of the specified window (keyboard) by sim-
ply pressing the cursor moving touch switch.
Numeral/(character) string input field
When the touch switch
at the top is pressed
Numeral/(character) string input field
Specified window opens.
Touch switches
assigned with
cursor movement
and window open
functions
1 2 3 4 5 6
–41.8
ABCDE
1 2 3 4 5 6
–41.8
1 2 3
6 5 4
Reference: A cursor moving touch switch can be created automatically when creating a
numeral input element or a (character) string input element.
If [Auto Arrange] is selected, it is not possible to move a touch switch indepen-
dently. To move a touch switch independently, deselect this attribute.
If a cursor moving touch switch is created later independently, the touch switch
can be associated with a specific input field. Specify the touch switch and se-
lect [Draw] (menu bar)
→
[Associate With]. To disassociate the touch switch
from an input field, select [Draw] (menu bar)
→
[Disassociate].
Cursor movement among data input fields is also possible using control code
input touch switches for which arrow-symbol key codes are set.