Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 150 / 573

6-2 Section Fixed Display
137
Terminology
Vertex
Vertex
Property setting
General
Line Style: Specify the type of line
Solid line, dotted line, alternate short and long lines, alternate
two short and long lines
Attribute
Standard, Flash (Flash can be set only for the NT21, NT31, NT31C, NT631,
and NT631C)
Color
Foreground: Specify the line color.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Guidance
For line type, the following four choices are provided.
Dot-dot-dash Solid Dash Dot-dash
The line type is specified using the line style property.
When creating a polyline, draw a continuous line first, then add vertices in the
edit operation to change the drawn continuous line into the desired broken line.
Vertices can be set at up to 254 positions.
To add a vertex, follow the steps shown below.
(1) Draw a continuous line.
(2) After locating the cursor at a position where a vertex is to be added, right
click the mouse and select [Add Node] in the pop-up menu.