Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 345 / 573

8-1 Section Image Editor
333
Changing the image data size
The image data size can be changed in either of the following two ways.
Changing the size by property setting
Changing the size to the range specifying frame size
Changing the size by property setting
Change the setting for [Size] in the image editor property settings to change the
size of the image data.
The image data size is changed according to the new setting; the reference
point of the size change is at the upper left corner of the present size.
If the size is reduced, part of the created graphic may be cut.
Changing the size to the range specifying frame size
The size of the image data can be changed to fit the size of the specified range
specifying frame.
Select [Edit] in the menu bar, then select [Clip].
Quitting the image editor
You can quit the image editor in any of the three ways described below.
Clicking the Button at the upper right corner of the image editor.
Selecting [Close] from the control menu box of the image editor.
Double clicking the control menu box of the image editor.
Control menu box