Octel XC1000, Руководство по обслуживанию

Страница: 773 / 889

RELEASE 4.0 SYSTEM UTILITIES
19-11 Release 4.0 XC1000 Service
The telephone line is connected properly.
The PBX/CO is providing dial tone to the port.
The TICs and line cards are functioning properly.
DIAL TONE PASS . The specified port successfully passed the dial-
tone-detect test. No action is required.
RECV LINE BUSY . The XC1000 was able to take the port off hook,
obtain dial tone, and dial the telephone number entered in the
Phone
Number: field on the Port Testing Administration screen (Figure 19-4).
However, a busy signal was detected when the telephone number was
dialed. If
RECV LINE BUSY
is reported, verify the following:
The telephone number was entered correctly in the Phone Number:
field on the Port Testing Administration screen.
The dialing sequence was entered correctly in the Dialing
Sequence: field on the Port Testing Administration screen.
A busy condition might exist on the destination phone line or hunt
group.
The line card is generating or detecting DTMF tones correctly.
RING NO ANSWER . The XC1000 was able to take the port off hook,
obtain dial tone, and dial the telephone number entered in the Phone
Number: field on the Port Testing Administration screen (Figure 19-4).
However, there was no answer when the telephone number was dialed.
If
RING NO ANSWER is reported, verify the following:
The telephone number was entered correctly in the
Phone Number:
field on the Port Testing Administration screen.
The dialing sequence was entered correctly in the Dialing
Sequence: field on the Port Testing Administration screen.
The line card is generating or detecting DTMF tones correctly.
NO AV A RESP . The XC1000 was able to take the port off hook,
obtain dial tone, and dial the telephone number entered in the Phone
Number:
field of the Port Testing Administration screen (Figure 19-4).
The XC1000 detected that the destination telephone line was an-
swered, but the destination system did not generate an autovon “A”
DTMF tone in response to the autovon “A” DTMF tone that was sent.
If
NO AV A RESP is reported, verify the following:
The telephone number was entered correctly in the Phone Number:
field on the Port Testing Administration screen.
The dialing sequence was entered correctly in the
Dialing
Sequence:
field on the Port Testing Administration screen.
A human or another device might be answering the test call.
The line card is generating or detecting DTMF tones correctly.
SECTION 19.2