Octel XC1000, Руководство по обслуживанию

Страница: 59 / 889

SITE PREPARATION
2-26 Edition One XC1000 Service
2.7 FLOOR-MOUNT INSTALLATION
The XC1000 cabinets are secured to a floor mount. The floor mount can be
bolted onto a concrete floor or onto a raised floor. Figure 2-14 shows the
floor-mount dimensions.
OUTLINE OF XC1000
DOORS AND SIDE-PANELS
FRONT
MAIN CABINET
FLOOR FRAME
EXPANSION CABINET
FLOOR FRAME
18 IN REF.
26 IN
6
17
/
32
IN
REF.
2
5
/
16
IN
25
31
/
32
IN REF.
Figure 2-14. Floor-Mount Dimensions (Top View).
When the XC1000 is installed on a concrete floor, power is accessed through
the ceiling. When the cabinet is mounted on a raised floor, the cables can be
routed through ducts under the floor. The raised floor must be constructed of
fire-resistant materials and conform to local building codes. Refer to Chapter
Three for XC1000 cabinet installation procedures.
Two floor mounts are required for the cabinets of a dual-cabinet system. The
two cabinets are connected as a single unit, then mounted to the floor.
2.8 HIGHLIGHTS
-
The procedures in this chapter are used to prepare the site so that
the XC1000 cabinet and other equipment can be installed after
delivery.
-
XC1000 installation is expedited by ensuring that site environmental
requirements are met.
-
Physical space and floor support for the cabinets must be considered
before XC1000 installation.
-
–48 Vdc power, return, and grounding must be installed and available
for the XC1000 cabinets.
-
All cabling should be installed and ready for connection to the XC1000
upon installation.
SECTION 2.7 – 2.8