Octel XC1000 Скачать руководство пользователя страница 698

Страница: 698 / 889

RELEASE 4.X FCP CONVERSION INSTRUCTIONS

17-12

Release 4.X

XC1000 Service

6. A MIRROR INSTALLATION screen appears briefly that describes the

installation. At

Press

↵

to begin installation or ESC to return to

DOS

, press

Enter

. Another MIRROR INSTALLATION screen appears.

7. The screen displays the MIRROR diskette drive and the drive and path

in which MIRROR will be installed. Make sure that C:\MIRROR\ is the
defined drive and path, or change the drive and path, if necessary.

8. At

Press

↵

for next field, Alt–S when done, or ESC to abort.

press the

Alt

and

keys.

9. After a moment, another MIRROR INSTALLATION screen appears. For

first-time MIRROR software installations, press

Enter

to select the

New installation

option.

If an earlier version of MIRROR software already exists on the hard
drive, press the down-arrow key once and press

Enter

to select the

Upgrade

option.

10. File names displayed as MIRROR files are copied to the PC hard drive.

When

Please insert the ADD–IN/EMULATION disk in drive A:

appears, remove the MIRROR Program diskette from the diskette drive.

11. Insert the MIRROR Add-in/Emulation diskette into diskette drive a:

and press

Enter

. Additional files are copied, and the SESSION/DATA

COMPRESSION PROTOCOLS screen appears, with a brief description
of MIRROR protocols.

12. Press

Enter

. The second SESSION/DATA COMPRESSION PROTOCOLS

screen appears.

13. Press

Alt

and

. A TERMINAL EMULATIONS

screen appears with a

brief description of MIRROR emulation files.

14. Press

Enter

. The TERMINAL EMULATIONS (List 1 of 3)

screen

appears.

15. Press

Shift

and

to select all emulations. Then press

Alt

and

copy files. The TERMINAL EMULATIONS (List 2 of 3)

screen appears.

16. Press

Shift

and

to select all emulations. Then press

Alt

and

copy files. The TERMINAL EMULATIONS (List 3 of 3)

screen appears.

17. Press

Shift

and

to select all emulations. Then press

Alt

and

copy files. The SAMPLE SCRIPTS & PRISM DEVELOPMENT FILES
screen appears, with a brief description of available sample scripts and
PRISM files.

18. Press

Enter

. The second SAMPLE SCRIPTS & PRISM DEVELOPMENT

FILES screen appears.

19. Press

Enter

to select the

Install all PRISM development files

option.

20. Files names are displayed as the PRISM development files are copied

to the PC hard drive. When

Press

↵

when you are ready, or ESC to

return to DOS.

prompt appears, press

Enter

. The VIDEO SETUP

screen is displayed.

21. At the

Video Adapter:

field, press

Enter

to display a list of video-

adapter types.

SECTION 17.7

Содержание XC1000






















































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание XC1000

Отзывы:

Бренды по названию

Популярные бренды

Octel XC1000, Руководство по обслуживанию

Результаты поиска

Содержание XC1000

Отзывы:

Бренды по названию

Популярные бренды