Octel XC1000, Руководство по обслуживанию

Страница: 769 / 889

RELEASE 4.0 SYSTEM UTILITIES
19-7 Release 4.0 XC1000 Service
If a schedule was established in either of the
Port Testing Schedule X:
fields, the port test will run at the next scheduled start time. If no schedule
was established, tests will run only when manually started. Refer to section
19.2.4 for details about performing manual tests.
19.2.2 Port/Test Status
To view the status of XC1000 ports or the status of a test in process,
select option
2 – Port/ Test Status from the Port Testing Utilities menu
(Figure 19-3) and press Return .
The port-testing-status display depends on whether a test is in process.
Sections 19.2.2.1 and 19.2.2.2 describe the Port Testing Status screen.
19.2.2.1 Port-Testing Status When Test Is Not in Process. If there is no test in
process, the Port Testing Status screen appears as shown in Figure 19-7.
1A
– Port Testing Status –
1B
1C
1D
2A
2B
2C
2D
3A
3B
3C
3D
4A
4B
4C
4D
5A
5B
5C
5D
6A
6B
6C
6D
Pt Pt Status Status
Screen will automatically update. Press Ctrl–C to exit.
Enter (R)eturn to the first page, (N)ext page:
Box 3591
Node 1
Box 3467
Node 5
Figure 19-7. Example of the Port Testing Status Screen
When Testing Is Not In Process.
If no test is in process, the Port Testing Status screen is a real-time display
of subscriber use by mailbox number and outbound networking traffic by
node number for each specific port. In the status column, fields for those
ports that are idle or in use for other reasons (outcalling, paging, fax
delivery, telephone answering, inbound networking, etc.) remain blank. The
Port Testing Status screen is automatically updated to display any changes
in status.
To exit the Port Testing Status screen, press the Ctrl and C keys simulta-
neously. To move to the next page of ports, press the
N
key. To return to
the previous page, press R.
SECTION 19.2