Octel XC1000, Руководство по обслуживанию

Страница: 668 / 889

RELEASE 3.0 SYSTEM UTILITIES
16-32 Edition One XC1000 Service
Figure 16-29 is an example of the Enable/Disable Drive Read-Only Mode
screen.
15 Jan 93 12:12:00 PM Enable/Disable Drive Read Only Mode
System Drives : 0 1
Installed
Running
Read-only
Message Drives : 0 1
Installed
Running
Read-only
: Y Y
: Y Y
: N N
: Y
: Y
: N Y
Y
N
To toggle R/0 status, enter drive number [S0–S3, Mo–M15]:
2
Y
Y
N 3
Y
Y
N 4
Y
Y
N 5
Y
Y
N 6
Y
Y
N
2
–
–
– 3
–
–
–
7
Y
Y
N
4 5 6 7
–
–
– –
–
– –
–
– –
–
–
Figure 16-29. Example of the Enable/Disable Drive
Read Only Mode Screen.
16.6.7 Reset CDR Pointers
Make sure to download any CDR data in the buffer to a PC
before running the Reset CDR Pointers utility. Running
this utility erases any data in the CDR buffer.
Caution!
Use the Reset CDR Pointers utility only when encountering problems with
the CDR buffer or when the CDR buffer has been expanded. This utility
causes the file card to write the next CDR data at the beginning of the
CDR buffer, erasing the current data. This utility is available only in the
offline mode. Perform the following steps to reset the CDR pointers:
1. Download that the current CDR buffer to a PC before continuing.
2. From the SMT Main Menu, shut down the XC1000 using menu 13.1,
because the Reset CDR Pointers utility can only be used in offline
mode.
3. From the
ENTER BOOT COMMAND:
prompt, type
^DU
to access menu
20.
4. From menu 20, type the corresponding menu-item number at the
Enter Choice: prompt to access the Miscellaneous Utilities menu.
5. From the Miscellaneous Utilities menu (Figure 16-24), enter the
number corresponding to the Reset CDR Pointers utility.
6. When the Reset CDR Pointers (y/n): prompt appears, enter Y to reset
the CDR pointers or N to cancel the reset and return to the Miscella-
neous Utilities menu.
SECTION 16.6