Octel XC1000, Руководство по обслуживанию

Страница: 281 / 889

STATUS LOG
7-38 Edition One XC1000 Service
Table 7-20. Offset 32 Values Associated
with a Call ID.
80 Ring-no-answer on incoming call
81 Busy on incoming call
82 All-calls-forward on incoming call
Description Value
When a value of 83 , direct incoming call, appears in offset 32, offsets
36 through 3A contain the calling party ID.
Offset 42. The value in offset 42 shows additional information about
integration-message types. A message-type
86
in offset 42 indicates an
ACP error (Table 7-18), which is a command showing error information
from the installed PID.
Offset 46. The value in offset 46 provides information specific to the
integration device installed. When a value of
86
appears in offset 42,
refer to Table 7-21 for a list of the possible values for offset 46.
Table 7-21. Offset 46 Values for Status-Code F9.
01 ACP internal
02 ACP message-waiting
03 Message-waiting, illegal-extension
04 AT&T System 75 PBX integration device
(APID/75)
05 APID/85
06 PBX integration device/ROLM
(PID/R)
07 Analog Meridian & SL-1 integration device
(AMID)
08 Digital Meridian & SL-1 integration device
(DMID)
Description
Offset
46
Value
When a value of 06 is found at offset 46, it shows a PID/R error.
Values at offsets 47 and 48–4D are affected. Refer to Table 7-22 for
pertinent information.
When a value of 07 appears in offset 46, the analog MID (AMID) is at
fault. Values describing the entry in further detail are located in
offsets 47 through 4B. Table 7-23 lists these values and their
descriptions.
When a value of 08 appears in offset 46, the DMID is at fault. Values
describing the entry in further detail are located in offsets 47 through
4B. Refer to Table 7-24 for pertinent information about the DMID and
the action to take when these entries occur.
SECTION 7.3