Octel XC1000, Руководство по обслуживанию

Страница: 493 / 889

RELEASE 1.55 UPGRADE INSTRUCTIONS
12-6 Edition One XC1000 Service
10. When the prompt
ENTER “Y” TO CONFIRM GARBAGE COLLECTION:
appears, type Y and press the Enter key.
11. Run garbage collect on all message drives by pressing the Enter key
when the
ENTER DRIVE # TO GARBAGE COLLECT (0–15) OR ANY
KEY FOR ALL DRIVES: prompt appears.
12. Garbage collect consists of two passes. After the first pass is com-
plete, scramble codes (SC) and I/O errors are reported. The results
are reported on a screen similar to Figure 12-3. If any errors are
detected during the first pass, contact the Octel Communications
Technical Assistance Center. If
no
errors are detected, type
Y
and
press the Enter key to continue to the second pass.
ENTER DRIVE # TO GARBAGE COLLECT (0–15) OR ANY KEY FOR ALL DRIVES:
BEGIN GARBAGE COLLECT (ALL PORTS ARE CLEAR) . . .
BEGIN FIRST PASS
# SC ERRORS = 0
# I/O ERRORS = 0
# MESSAGES (DESTINATIONS) = 13
# OF USERS WITH ERROR = 0
# OF NODES WITH ERROR = 0
ENTER “Y” TO CHANGE USER RECORDS AND UPDATE FREE SPACE TABLES,
ENTER “N” TO LEAVE SYSTEM UNCHANGED:
Figure 12-3. Garbage Collect, First Pass.
13. Upon completion of the second pass, the results are reported on the
screen, similar to Figure 12-4. If SC or I/O errors are reported during
the second pass, call the Octel Communications Technical Assistance
Center.
# SC ERRORS = 0
# I/O ERRORS = 0
# MESSAGES (DESTINATIONS) = 13
# OF USERS WITH ERROR = 0
# OF NODES WITH ERROR = 0
PORT MSGS BLKS BOS TOT BOS ACT
31 13 30 451310 409468
TOTAL 13 30 451310 409468
GARBAGE COLLECTION SUCCESSFUL
PRESS ANY KEY TO CONTINUE
Figure 12-4. Garbage Collect, Second Pass.
SECTION 12.5