Octel XC1000, Руководство по обслуживанию

Страница: 545 / 889

RELEASE 2.X UPGRADE INSTRUCTIONS
13-25 Edition One XC1000 Service
The
Link Name:
field and the
Type of Switch to which the System
is Integrated: fields appear after entering a link number.
3. In the
Link Name:
field, assign a name to the link, for example, CO555.
4. In the Type of Switch to which the System is Integrated: field,
enter
3
for full-duplex 1AESS/SMDI.
5. For the Baud Rate: field, select one of the following:
0 – 1200 baud
1 – 2400 baud
2 – 4800 baud
3 – 9600 baud
4 – 19.2K baud
6. For the Number of Data Bits: field, select one of the following:
0 – 7 data bits
1 – 8 data bits
7. For the Number of Stop Bits: field, select one of the following:
0 – 1 stop bit
1 – 2 stop bits
8. For the
Parity (Odd/Even)
field, select one of the following:
0 – no parity
1 – odd parity
2 – even parity
9. For the
XON/XOFF:
field, select one of the following:
0 – use XON/XOFF
1 – ignore XON/XOFF
Select 1 for all switch types, except the DMS-100/SL-100 with 1X67
Revision BC or BD ACP I/O integration, which uses XON/XOFF
integration.
10. For the
Carrier Detect:
field, select one of the following:
0 – use carrier detect
1 – ignore carrier detect
11. To check link status for SMDI integration, enter an invalid extension
in the
Extension to Check SMDI Message Waiting:
field. For
DMS-100s, first change the number of digits in menu 1.1 from 7 to 4
in the Number of Digits in Extension (Used for Message Waiting):
field, so that 4 digits can be entered in menu 6.1.
For DMS-100s, enter a 4-digit number, for example, 0000 . For all
other switches, enter a 7-digit number, for example,
9999999
.
Entering an invalid extension indicates whether or not the link is
accepting messages.
If the number of digits was changed in menu 1.1 for a DMS-100, the
number of digits must be changed back from
4 to 7 to in the Number
of Digits in Extension (Used for Message Waiting): field after the
upgrade is completed.
SECTION 13.14