Octel XC1000, Руководство по обслуживанию

Страница: 713 / 889

RELEASE 4.X FCP CONVERSION INSTRUCTIONS
17-27 Release 4.X XC1000 Service
c. At
ENTER DRIVE TO VERIFY (0–3):
, type
0
(zero) and press
Enter .
d. At ENTER DRIVE TO VERIFY AGAINST (0–3): , type 1 and press
Enter .
e. Type a to select option A – VERIFY ALL PHRASES (SYSTEM
AND IVR) , then press Enter .
f. At ENTER LANGUAGE NUMBER (1–5) TO VERIFY OR ‘A’ TO
VERIFY ALL LANGUAGES: , type a for ALL , then press Enter .
g. At
VERIFY ALL LANGUAGES ... CONTINUE (Y OR N)?
, type
y
and press Enter .
h. The phrase verification runs. When VERIFY COMPLETE ...
PRESS ANY KEY TO CONTINUE
appears, press
Enter
. The
VERIFY OPTIONS: menu reappears.
i. Type x to select option X – EXIT and press Enter . The COPY
OPTIONS: menu reappears.
j. Type x to select X – EXIT again, and press Enter .
20. At ENTER BOOT COMMAND: , turn off XC1000 power.
21. Create a backup of system-drive 0 as follows:
a. Place the backup drive in slot 2 and connect the cable.
b. Turn on XC1000 power.
c. At ENTER BOOT COMMAND: , type ^DC . The COPY OPTIONS: menu
appears (Figure 17-66).
d. Type d to select option D – SYSTEM [ALL OF THE ABOVE] to
copy software, phrases, and the database. Then press Enter .
e. At
ENTER SOURCE DRIVE LOCATION:
, type
0
(zero) and press
Enter .
f. At ENTER ALTERNATE SOURCE DRIVE LOCATION: , type 1 and
press
Enter
.
g. At ENTER DESTINATION DRIVE NUMBER (0–3): , type 2 and
press Enter . The XC1000 displays the drives’ serial numbers.
h. Verify that the serial numbers are correct. If they are correct,
type y and press Enter at the CONTINUE (Y OR N)? prompt to
continue the backup.
i. At WILL DESTINATION DRIVE BE A REPLACEMENT (Y/N)? ,
type n and press Enter .
j. The backup then begins. When complete, press
Enter
to return
to the COPY OPTIONS: menu (Figure 17-66).
k. Type x to select option X – EXIT and press Enter . The ENTER
BOOT COMMAND:
prompt will appear again.
l. Turn off XC1000 power.
SECTION 17.9