Octel XC1000, Руководство по обслуживанию

Страница: 583 / 889

RELEASE 3.02 FCP CONVERSION INSTRUCTIONS
14-21 Edition One XC1000 Service
1. Make sure that the XC1000 SMT is displaying the Main Menu. Open
the doors of the XC1000.
2. Disconnect the SMT cable, P/N 057–1174–000, from the back of the
terminal. Plug the adapter end into a DB25/DB9 adapter, P/N
003–1091–000, and plug into the PC COM1 port.
3. Leave the other end of the cable, P/N 057–1174–000, plugged into
SMT port J50. Set aside the terminal.
4. Plug one end of the second cable, P/N 057–1174–000 into a 25-pin
male/25-pin female null modem connector, P/N 003–1115–000, and
then into flexible port J43.
5. Plug the other end of the second cable into a DB25/DB9 adapter, P/N
003–1091–000, and then into the PC COM2 port.
6. If the PC COM ports have 25-pin male connections, plug two female/
female DB25/DB25 gender changer adapters, P/N 003–1092–000, into
the PC COM ports.
7. Make sure that the cabling connections are correct.
Figure 14-12 is a representation of the hardware configuration for
connecting the PC to the XC1000.
COM2
(SMT PORT)
COM1
B
C
B
C
J43 J44 J45
A
A
XC1000 BACK
J46 J47 J48 J49 J50
NULL MODEM,
A = 25-PIN MALE
B = 25-PIN FEMALE
C = 9-PIN FEMALE
J43 CABLE (P/N 057–1174–000) PLUGS
INTO PC COM2 PORT (9–PIN MALE).
J50 CABLE (P/N 057–1174–000) PLUGS
INTO PC COM1 PORT (9–PIN MALE).
ADAPTER,
P/N 003–1091–000
P/N 003–1115–000
CABLE, PN 057–1174–000
(ADAPTER INCLUSIVE)
** IF THE PC COM PORTS HAVE 25-PIN MALE CONNECTIONS, USE FEMALE/FEMALE DB25/DB25 GENDER CHANGER
ADAPTERS, P/N 003–1092–000.
Figure 14-12. Representation of the PC-to-XC1000 Connection.
14.9 PERFORM THE FCP CONVERSION
With the PC connected to the XC1000, perform the FCP conversion as follows:
1. If the XC1000 system manager terminal was disconnected when the
Main Menu was displayed and the PC displays the FCP conversion
Main Menu (Figure 14-4), skip to step 2. Otherwise, perform the
following procedure:
SECTION 14.8 – 14.9