Octel XC1000, Руководство по обслуживанию

Страница: 158 / 889

STARTUP AND INITIALIZATION
4-42 Edition One XC1000 Service
Menu 1 – System Parameters
– Installation Information –
:
Company Name :
Company Address:
Company Phone Number (include area code):
VPMOD Phone Number (include area code): Extension:
Number of Rings for Local and Long Distance Calls (Used for Outcalls):
ACP Used for Integration: N
Type of PBX or Centrex VPMOD is on:
Number of Digits in Extension (Used for Outcalling and ECP):
Number of Digits in Extension (Used for Message Waiting):
Number of Rings for On-PBX Calls (Used for Outcalling):
Number of Rings for On-PBX Calls (Used for ECP):
Sender ID Used for Telephone Answering Messages:
Saved Messages—Keep Date/Time Stamp of When the Message was Received:
Block Messages to Uninitialized Mailboxes (Y/N): N
:
Figure 4-27. Second Screen of Menu 1,
Installation Information (Menu 1.1).
-
VPMOD Phone Number (include area code):
-
Ext.:
-
Type of PBX or Centrex VPMOD is on:
-
Number of Digits in an Extension (Used for Outcalling and
ECP):
-
Number of Digits in an Extension (Used for Message Waiting):
-
Saved Messages—Keep Date/Time Stamp of When The
Message was Received:
-
ACP Used for Integration:
2. In the Number of Rings for Local and Long-Distance Calls (Used
for Outcalls): field, enter the number of rings allowed for outcalling
before XC1000 considers the outcall unanswered and disconnects. The
maximum number allowed is
20 .
This field determines the number of rings for outcalls to a local
(7-digit) or long-distance (10-digit) number—for example, calling a
pager, the subscriber’s home, or the subscriber’s office.
3. In the Number of Rings for On-PBX Calls (Used for Outcalling): field,
enter the number of rings allowed when XC1000 places an outcall to a
telephone number within the switch or Centrex partition. The max-
imum number allowed is
20 . If the telephone remains unanswered after
the specified number of rings, XC1000 disconnects and attempts the
call at a later time.
An excessive number of rings can cause delays in the connection. The
number of rings should be set for one less than the number of rings
allowed by the switch. This field shows only the number of rings for
outcalls to a telephone number in the switch. It does
not show the
number of rings before an outside call is forwarded to another tele-
phone number or to XC1000.
SECTION 4.7