JUMO AQUIS touch P 202580, Руководство по эксплуатации

Страница: 71 / 322

71
8 Operation
(3) Detailed screen 1 Freely configurable large-section screen
Display of 1 main measuring value, 1 second measuring value, 1 addi-
tional value and up to 3 binary values, as well as additional visualization
of the main measuring value and the alarm limits for an analog input with
a bar graph
(4) Detailed screen 2
(5) Detailed screen 3
(6) Detailed screen 4
(7) Detailed screen 5
(8) Detailed screen 6
(9) Diagram
group 1 Up to 4 analog measuring values and 3 digital functions can be displayed
on a configurable recorder screen. Diagrams of disabled groups are not
available in the operation loop.
(10) Diagram
group 2
(11) Process screen User-defined visualization screen that is freely configurable by means of
an editor in the PC setup program
v
Chapter 19.8.10 "Process screens", Page 270
With the aid of static and dynamic graphic and display elements for ana-
log and binary values, it is possible to create a screen that displays the
process flow concerned in an especially vivid manner. If no process
screen is configured, none is available for the operation loop.
(12) Controller over-
view
The active controller channels are visualized here in an overview
display. The controller overview becomes available as part of the oper-
ating loop only if at least 2 controllers are activated. The current setpoint
values, actual values and output levels are displayed for all active con-
trollers. In addition, the operating states of the controllers are displayed
(manual mode, hold, self-optimization).
(13) Controller screen
Controller 1
The controllers are visualized in detail on the controller screens. The con-
troller screens are available as part of the operation loop only for the re-
spectively configured channels. The information displayed includes the
current setpoint value, actual value and output level. The binary values
of switching controller outputs are visualized. In addition, controls for set-
point value entry, manual output level control and self-optimization are
available. Access to the operating functions depends on the user rights
of the logged-in user.
(14) Controller screen
Controller 2
(15) Controller screen
Controller 3
(16) Controller screen
Controller 4
Fig. Operation screen Description