JUMO AQUIS touch P 202580, Руководство по эксплуатации

Страница: 149 / 322

149
10 Configuration
Signal
Tolerance band x Selection from
Analog selector Selection of an analog signal the deviation of
which
from the "Tolerance band w signal"
is to be monitored
The timer starts and continues running only if the
amount of deviation is not greater than the set
window range. If the deviation
is greater than the window range, running timers
are interrupted and timer start for timers that
have not yet started is prevented.
Signal
Tolerance band w Selection from
Analog selector Selection of the analog signal from which the
"Tolerance band x signal" may not deviate by
more
than the "Window range" in order for the timer
to run
Window range 0 to 99999
a
maximum amount of deviation |x - w|
Enable wash event Yes
No Activation/deactivation of event list entries with
On-signal from "Timer start signal"
Event list text up to 21 text characters Text for the event list with On-signal from
"Timer start signal"
a
The unit for the window range is obtained from the "Tolerance band x signal" parameter in this table.
Configuration point Selection/
setting option
Explanation
t
w/x
x
w
Window
size
Timer running Timer blocked Timer blocked