JUMO AQUIS touch P 202580, Руководство по эксплуатации

Страница: 112 / 322

9 Parameterization
112
min. relay
switch-on time 1
(T
k1
)
0 to 60 s
factory setting:
0.0 s
Depending on the Min. relay switch-on
time, a lower limit is set for the pulse length
or an upper limit is set for the pulse fre-
quency.
This thereby limits the operating frequency
of switching outputs.
Min. relay
switch-on time 2
(T
k2
)
max. pulse fre-
quency 1 0 to 240 min
-1
factory setting:
60 min
-1
for continuous controllers with a pulse
frequency output :
maximum pulse frequency
max. pulse fre-
quency 2
Switch-on de-
lay 1
0 to 999.9 s
factory setting:
0.0 s
Delay of the energizing edge with limit
monitor response
(proportional band = 0)
Switch-on de-
lay 2
Switch-off de-
lay 1
0 to 999.9 s
factory setting:
0.0 s
Delay of the switch-off edge with limit mon-
itor response
(proportional band = 0)
Switch-off de-
lay 2
Alarm tolerance 0 to 999.9
(Unit
dependent on
the actual value
input variable)
factory setting:
0.0
maximum value of the control deviation
without triggering an alarm,
if this value is exceeded, the controller
monitoring function triggers a "Dosing
alarm"
Alarm delay 0 to 9999 s
factory setting:
0 s
Delay of the dosing alarm allows violation
of the alarm tolerance for a limited time.
Parameter
(Formula sym.)
Setting op-
tions
Explanation