JUMO AQUIS touch P 202580, Руководство по эксплуатации

Страница: 76 / 322

8 Operation
76
User level Permits fast and simple access to a
selection of up to 25 frequently needed parameters from the
parameter level and the configuration level.
No user level is configured at the factory. The user level must
be configured and loaded into the device with the aid of the
JUMO PC setup program. The "User Level" entry does not
appear in the device menu as long as no user level is config-
ured.
v
Chapter 8.2.2 "User level", Page 79
Configuration Basic operation of the device inputs and outputs and the de-
vice functions is set here.
v
Chapter 10 "Configuration", Page 115
Parameteriza-
tion Setting the date/time and controller parameter sets, as well
as pre-setting controller setpoint values.
Fixed numerical values can be defined in the "Manual val-
ues" submenu.
v
Chapter 9 "Parameterization", Page 109
Functional level Manual operation of certain functions for testing and diag-
nostic purposes (e.g. start wash contact or reset counter)
v
Chapter 8.2.3 "Functional level", Page 80
Device informa-
tion Information about the device hardware and software, viewing
of current analog and binary values for all device functions,
inputs, and outputs
v
Chapter 8.2.4 "Device information", Page 82
Service Display and readout of service data for diagnostic purposes,
saving and loading of a default configuration and perfor-
mance of the basic Ci base calibration for commissioning of
Ci analysis inputs (inductive conductivity)
v
Chapter 8.2.5 "Service", Page 83
Calibrate
Touchscreen Calibration of the touchscreen to ensure the reliability and
convenience of touch control
v
Chapter 8.2.6 "Calibrating the touchscreen", Page 84
Device menu
items Description