JUMO AQUIS touch P 202580, Руководство по эксплуатации

Страница: 310 / 322

20 Technical data
310
20.3 Analog outputs of base unit and optional boards
20.4 Binary inputs base unit
20.5 Binary inputs optional boards
20.6 Binary outputs, power supply unit board
Signal type Signal range Admissible
load resistance Accuracy Effect of am-
bient tem-
perature
Voltage signal 0 to 10 V > 500
Ω ≤
0.25 %
≤
100 ppm / K
Current signal 0/4 to 20 mA < 450
Ω ≤
0.25 %
≤
100 ppm / K
Description Input frequency
ranges Min. pulse dura-
tion Signal type Switching thresh-
olds
a
a
This specification is relevant only if the Ext. voltage supply is selected under the “Contact” point in the
Configuration. Sensors and transmitters should be supplied from voltage supply outputs on the JUMO
AQUIS touch P. An externally supplied voltage signal must not have a voltage over 28 V.
On Off On Off
IN 1
b
b
All digital inputs IN 1 to 3 are suitable for connecting proximity switches. Recommended
types are: Wachendorff P2C2B1208NO3A2 and Balluff BES M12EG-PSC80F-BP03.
≤
1 Hz 300 ms 300 ms Configurable as:
potential-free con-
tact,
or
ext. voltage supply
(maximal 28 V) > 8 V
> 1.8 mA < 5 V
< 1.2 mA
IN 2 to 3
b,c
Switching sig-
nal
c
Digital inputs IN 2 and IN 3 can be used for impeller flow-through sensors (water meters) or
magnetic-inductive flow-through meters (square-wave signal), for example. The input frequency depends
on the configured measuring principle in the flow-through function.
≤
1 Hz 30
μ
s 30
μ
s
IN 2 to 3
b,c
Flow
3 to 300 Hz
300 Hz
to
10 kHz
30
μ
s 30
μ
s
Max. number of retrofittable
digital inputs Max.
pulse frequen-
cy Min. pulse dura-
tion Signal type
On Off
max. 2 optional boards with 3 digi-
tal inputs each 1 Hz 300 ms 300 ms Potential-free contact
Description Switching out-
put Ampacity at ohm-
ic load Contact life
a
a
The maximal ampacity of the contacts must not be exceeded.
OUT 1 Relay, change-
over contact 3 A at AC 250 V 150,000 switching cy-
cles
OUT 2 Relay, change-
over contact