JUMO AQUIS touch P 202580, Руководство по эксплуатации

Страница: 144 / 322

10 Configuration
144
10.11.2 Controller inputs
Open: Device menu
r
Configuration
r
Controller
r
Controller 1 to 4
r
Input
Configuration point Selection/
setting option
Explanation
Description up to 15 text characters Designation of the controller input
Actual value Selection from
Analog selector Selection of the analog signal source for the ac-
tual value
Output level feedback Selection from
Analog selector
only for modulating controllers and continu-
ous controllers with position feedback:
Selection of the analog signal source for the cur-
rent output level (e.g. universal input with resis-
tance potentiometer or analog input with
standard signal)
Output level feedback is required on continuous
controllers with position feedback.
Parameter selection Selection from
binary selector Selection of the digital signal source for switching
from parameter set 1 to parameter set 2
Two parameter sets are stored for each control-
ler and can be switched via this
digital signal.
v
Chapter 9.2 "Parameter Sets (Controller pa-
rameter)", Page 110
Digital signal for man-
ual Selection from
binary selector Selection of the digital signal source to switch the
controller to manual mode
In addition to the button on the
respective controller screen, it is also
possible to activate manual mode with a
digital signal (e.g. key switch for a digital input)
binary signal (e.g. key switch)
Digital signal for hold Selection from
binary selector
Selection of the digital signal source to switch the
controller to hold mode
Manual text up to 15 text characters Text for the alarm/event list upon activation of
manual mode
Alarm text up to 15 text characters Text for the alarm/event list upon occurrence of a
dosing alarm