JUMO AQUIS touch P 202580, Руководство по эксплуатации

Страница: 158 / 322

10 Configuration
158
K-Faktor 0 to. 99999 l
-1
Ratio of the pulse count to flow rate (pulses per
liter)
The K-factor can be obtained from the documen-
tation for the fitting in which the flow-through sen-
sor (e.g. paddle wheel sensor) is installed.
If the flow-through signal is transmitted as a stan-
dard signal
or via an interface (external analog inputs),
be aware that the K-factor affects analog values
as well. For reliable handling of the flow-through
as an analog signal, it is recommended that the
flow value be generated as a standard signal and
the K-Faktor set to a value of 1.
Unit l / s
l / min
l / h
m
3
/ s
m
3
/ min
m
3
/ h
gal / s
gal / min
gal / h
customer-specific
Unit for the flow-through value
Customer-specific unit:
In the individual measured display, the
flow rate value in liters per second is multiplied by
the factor from the "Conversion factor" setting
and the unit displayed on the basis of the " Unit
description" setting.
Conversion factor
(flow rate) -99999 to +99999 only for "customer-specific" as "Unit":
Conversion factor from the unit "l / s" for the
flow rate to the customer-specific unit
Unit description
(flow rate) up to 5 text characters only for "customer-specific" as "Unit":
Entry of an arbitrary customer-specific unit for the
flow rate
Decimal place
(flow rate) Auto,
Fixed comma format Decimal points in the display
Start
Display range
(flow rate) -99999 to +99999
a
Upper/lower limit for labeling the scale
when displaying measuring values, e.g. in re-
corder diagrams and bar graphs
End
Display range
(flow rate) -99999 to +99999
a
Configuration point Selection/
setting option
Explanation