JUMO AQUIS touch P 202580, Руководство по эксплуатации

Страница: 225 / 322

225
19 PC Setup Program
Moving the toolbar
The user can change the position of the toolbar:
Possible positions of the toolbar:
•
Along the left or right window border (vertical alignment)
• Below the menu bar (horizontal alignment),
• Along the lower edge above the user information (horizontal alignment)
• Any position (its own window - any alignment by changing the window size)
Closing the toolbar
If the toolbar was moved, it can be closed by clicking the cross at the right upper
corner of the toolbar window. To display the toolbar again, it must be activated
(set checkmark) in the "Standard Settings" menu under "User Interface".
File
r
Standard Settings
The toolbar that appears at the location to which it was previously moved.
Working area
The working area consists of the navigation tree (at left) and the display window
(at right)
and displays the current settings of a configuration file (setup file).
v
Chapter 19.5.3 "Editing the setup file", Page 229
The way the working area is divided can be changed by moving the border be-
tween the navigation tree and display window sideways with the aid of the left
mouse button.
Connection status
The "Connection status" line indicates whether a connection to a device exists.
In addition, some interface data are displayed, e.g. the IP address.
The "Window" menu can be used to show or hide the line.
The height of the line can be changed by moving the border of the online data
window with the aid of the left mouse button.
Step Action
1 Position the mouse pointer between two icon groups
2 Left-click with the mouse button
3 While holding down the left mouse button, move the toolbar to the
desired location
4 Release the left mouse button