Intel 81341 Скачать руководство пользователя страница 256

Страница: 256 / 1056

Intel

81341 and 81342—Address Translation Unit (PCI Express)

Intel

81341 and 81342 I/O Processors

Developer’s Manual

December 2007

256

Order Number: 315037-002US

3.3.4

Outbound Read Transaction

An outbound read transaction is initiated by the Intel XScale

processor

or one of the

DMAs and is targeted at a PCI slave on the PCI Express Link. The read transaction is

propagated through the outbound non posted queue (ONPQ) and read data is returned

through the inbound completion data queue (ICPLDQ).
The ATUs internal bus target interface claims the Memory Read transaction and

forwards the read request through to the PCI Express Link and returns the read data to

the internal bus.
The data flow for an outbound read transaction on the internal bus is summarized in

the following statements:

• The ATU internal bus interface latches the internal bus address when the address is

inside an outbound address translation window (or the direct addressing window,

when enabled) and the ONPQ is not full. All read transactions are handled as split

transactions. When the ONPQ is full (previous outbound transactions in progress),

the internal bus interface signals a Retry to the transaction initiator.

• Read requests is fragmented into sub-requests based on the

Max_Read_Request_Limit.

• When NPH credits are available, the ATU issue the read request when the head of

the ONPQ has at least one entry and the ordering rules are satisfied.

• Once the request is issued, the Transaction Pending bit is set in the

“PCI Express

Device Status Register PE_DSTS”

• When a Completion with Completion Status of UR or CA is encountered, a flag is set

and the ATU aborts the completion to the internal bus requester. The ONPQ is

cleared of the transaction.

• Completions for subsequent sub-request that are already issued is marked for

deletion and dropped once the completion returns.

• Once the transaction completes on the PCI Express Link, the ATU generates a

completion transaction to return data to the internal bus requester.

• Once all outstanding request are satisfied, the Transaction Pending bit is cleared in

the

“PCI Express Device Status Register PE_DSTS”

8. For best performance, the user should designate the two Outbound Memory Windows as non-

cachable and bufferable from the Intel XScale

processor. This assignment enables the Intel

XScale

processor to issue multiple outstanding transactions to the Outbound Memory Windows,

thereby, taking full advantage of the ATU outbound queue architecture. However, the user needs

to be aware that the Outbound ATU queue architecture does not maintain strict ordering between

read and write requests as described in

Table 126, “ATU Outbound Data Flow Ordering Rules” on

page 269

. In the event that the user requires strict ordering to be maintained, the user must

change the designation of this region of memory to be non-cachable/non-bufferable and enforce

the requirement in software.

Содержание 81341

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 81341

Отзывы:

Похожие инструкции для 81341

Бренды по названию

Популярные бренды

Intel 81341, Руководство разработчика

Результаты поиска

Содержание 81341

Отзывы:

Похожие инструкции для 81341

Бренды по названию

Популярные бренды