Ibml ImageTracDS 1210, Руководство по обслуживанию

Страница: 114 / 250

Maint
07-0200
■ List of Option Settings operations
No. Item Setting Description
1 Read Data New Data The Scanner captures an image so that the latest waveform
data from the image sensor can be displayed.
Current Data The last captured waveform data from the image sensor is
displayed.
In this case, the Scan Image and Sheet Side settings are not
used.
2 Scan Image Scan At the same time, image capture is executed according to the
settings in the file specified by Specify Name of Format File.
Both waveform display and image capture are executed and
displayed.
Not Scan Image capture is not executed. No sheets are necessary.
Only waveform data is displayed.
Specify Name of
Format File For each of the front and back sides, this setting specifies the
format file name used for scanning ,
The initial setting (C:\HITACHI\HTSCNDR…) is a format
for A4 landscape. It works with LOCAL TEST SHEET
040-7-4 that comes with the Scanner.
You can use commercially available A4 copy sheets instead.
3 Sheet Side Front Only the front side is scanned.
(Data for the back side is not updated.)
Back Only the back side is scanned.
(Data for the front side is not updated.)
Both Sides Both sides are scanned.
(3) Click [OK].
Measured waveform data will be displayed.