Ibml ImageTracDS 1210, Руководство по обслуживанию

Страница: 211 / 250

Maint
09-0050
9.4 Checking pressing force of Pick Roller
Open the Pick Cover as follows and check the hooked position of the Pick Spring.
* Be sure to hook the springs at the same position for both sides.
Hooked
position Pressing
force effect attention countermeasure Recommended sheet
Back Weaker Reduce
multiple sheets
feeding Tend to
cause
mis-feeding - Clean rollers frequently
- If there is a warp or bend
in sheets, straighten them. - Small document
- Document which is
hard to separate
Standard Normal - - - -
Front Stronger Reduce
mis-feeding Tend to
cause
multiple
sheets
feeding Separate stack of sheets
before setting on the Input
Tray. See “
3.2.3 Preparing
Documents ” in User’s
Manual
- Large document
- Document which tends
to cause mis-feeding due
to a wrap or bend
Standard position (2nd from the frond side)
back
front