Ibml ImageTracDS 1210, Руководство по обслуживанию

Страница: 63 / 250

Maint 06-0090
6.5 Information Display of Photo / SW / Ultrasonic sensor
6.5.1 Photo level / Switch status
(1) Specify the parameters and click [Run]. Usually, the default setting is used for the check.
•
Scanner light source (Front) : Light on (Default) (LED on the CIS) *1
•
Scanner light source (Back) : Light off (Default) (LED on the CIS) *1
•
Photo : ON (Default) (The LED on the photo sensor PCxx is turned on.)
: OFF (The LED on the photo sensor PCxx is turned off.)
•
Input Tray position : F/L (Scanning position)
: L/L (Default) (Standby position)
*1 : If ON is selected, the scanner lamp is continuously lit.
(2) The level of each photo sensor is displayed and refreshed about every 2 seconds. If you want to stop updating the
levels, click [Pause]. If you want to exit the window, click [Finish].
The following is a window after the [Pause] button is pressed. In the window, the [Pause] button is actually an
[Run] button.