Ibml ImageTracDS 1210, Руководство по обслуживанию

Страница: 109 / 250

Maint
07-0150
7.6 Load / Store Device Unique Information
Notice:

If you load a file in Start mode [2], after the loaded file is programmed, the device will restart.
Do not turn off the device even when a screen is displayed to indicate download is finished.
After the device restarts, wait until the device goes into the standby mode.

This function loads or stores the device unique information of the Scanner when you replace the Main PCB
assembly (CPS878).

Use "Load / Store Device Unique Information" function to store the device unique information before the
replacement and load the stored device unique information back to the new CPS878_PK-PCB after the
replacement.
If for some reason, you cannot load the stored device unique information back to the new Main PCB
assembly (CPS878) when you replace the Main PCB assembly (CPS878), setup the settings directly using
"7.4 Work Information Display" and "7.7 Option Settings" .
■ Reference

See "4 .3 Replacing Main PCB assembly (CPS878) " .
(for the information about how to move the device unique information in the PCB to the new PCB after the
replacement)

See " 8.3.1 Replacing Main PCB assembly (CPS878) ".
(for the information about the actual replacement procedure)
Start mode
[1] Device

Host: Used to store the device unique information to the host system.
[2] Host

Device: Used to load the device unique information from the host system to the Scanner.
■ Start mode [1] Device

Host
(1) Specify [1] for Start mode and press Enter .
When "Device

Host" is selected, the device unique information saved in the device is stored to the host
system. The device unique information includes the option, work, and calibration information,