Ibml ImageTracDS 1210, Руководство по обслуживанию

Страница: 98 / 250

Maint
07-0040
7.3 Work Information Display
Notice:
•
If you update the setting in the Start mode [2] or [3], after the setting is stored, the device will
restart. Do not turn off the device during this period. After the device restarts, wait until the
device goes into the ready mode.
Shows work information such as the printed sheet count.
Start mode
[1] "Display" is used when you want to display the operation information.
[2] "Maintenance1" is used when you want to clear the relative values after you replace periodic replacement
parts. (You cannot enter thresholds.)
[3] "Maintenance2" is used for each customer when you want to adjust the thresholds (warning levels) for the
scanned sheet counts or other thresholds to the life span of the rollers.

Start mode [1] Display
(1) Configure Path Prefix and specify [1] for Start mode. Then press Enter .
(2) Check the information shown. When you finish, press Enter .