Hioki MR8827 Скачать руководство пользователя страница 46

Страница: 46 / 436

Prepare Storage Media

Storage media

Insertion procedure and notes

USB Memory

•

Do not connect any devices other than USB memory sticks.

•

Not all commonly available USB memory sticks are supported.

•

To use a USB memory stick, suitable unit settings must be made, as described next page.

To insert a USB memory stick

Ensure correct orientation of the USB memory stick

and push it all the way into the connector.

To remove a USB memory stick

Verify that the instrument is not accessing the USB

memory stick (for saving or loading data, etc.). Then

pull the USB memory stick out.

(No special steps are required on the instrument.)

USB Connector

(Type A)

Front side

Depending on the intended use of the USB memory stick, connector types and settings on the instrument

will differ.

USB use

Connector

Instrument settings

Reference

information

Interface

USB setting

USB memory stick

Type A

LAN

USB Memory

See procedure

below

To retrieve CF card or built-in drive files

from a computer (PC) (using a USB cable)

Type B

LAN

Mass storage HDD,

mass storage CF

“16.4” (p. 326)

For communication with a PC (using a USB

cable)

Type B

USB

Interface

“16.6.1” (p. 328)

Even when the built-in drive is SSD, it is recognized as HDD.

Procedure

Press the

SYSTEM

key to open the System screen, and then select the

[Interface]

sheet.

Move the cursor to

[Interface]

, and select

[LAN]

Move the cursor to

[USB Set]

, and select

[USB Stick]

Measurement Preparation

Содержание MR8827




















































































































































































































































































































































































































































Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды

Hioki MR8827, Инструкция по эксплуатации

Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды