Hioki MR8827 Скачать руководство пользователя страница 45

Страница: 45 / 436

Prepare Storage Media

2.3 Prepare Storage Media

Read “Handling Media” (p. 9) carefully.

2.3.1

Storage Media (Inserting a CF Card and USB Memory Stick)

Media icons

USB

Memory

CF card

Built-in

drive

Icons indicating the status of storage media are always shown at the top

of the screen.

: Media is inserted

: Media is inserted and selected as save target

(Icon is red)

: Media is not inserted but is selected as save target

(Icon is black)

Storage media

Insertion procedure and notes

CF Card

To insert a CF card

With the Front mark (

) pointing toward the slot, fully

insert the card in the direction of the arrow.

When the Eject button has popped out, press it

down first before inserting the CF card all the way

in. Inserting the CF card when the Eject button is not

pressed down may cause damage to the instrument.

If the CF card cannot go all the way in, do not force it

in. Press the Eject button so it pops out, then press it

down again before fully inserting in the CF card.

CF card slot

Front side

To remove a CF card

Press the Eject button. Press the Eject button. When

the button pops out, press it again to eject the CF

card.

Insert

Remove

Eject button

Built-in drive

Model U8330 SSD Unit (capacity: 128 GB, 1 GB=1,000,000,000 bytes)

The optional Model U8330 SSD Unit (factory option) is required.

The hard disk is formatted at the factory.

RAM (Internal

memory)

•

Memory integrated in the unit is used. Only settings files can be saved.

•

Automatic saving of data is not possible.

Содержание MR8827




















































































































































































































































































































































































































































Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды

Hioki MR8827, Инструкция по эксплуатации

Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды