Hioki MR8827 Скачать руководство пользователя страница 9

Страница: 9 / 436

Safety Information

Symbols Affixed to the Instrument

Indicates cautions and hazards. When this symbol is printed on the instrument, refer to

the corresponding topic in this Instruction Manual.

Indicates the ON or OFF side of the power switch.

Indicates a grounding terminal.

Indicates AC (Alternating Current).

Indicates a burn hazard if touched directly.

Standards Symbols

This symbol indicates that the electrical and electronic appliance was put on the EU

market after August 13, 2005, and producers of the Member States are required to display

it on the appliance under Article 11.2 of Directive 2002/96/EC (WEEE).

This symbol indicates that the product conforms to regulations set out by the EU Directive.

Other Symbols

This manual uses the following symbols to indicate specific information for operating the instrument.

(p. )

Indicates the location of reference information.

CURSOR

(Bold text)

Names of settings, buttons, and other screen elements are written in bold blue text.

Unless otherwise specified, “Windows” refers to Windows Vista, Windows 7, and

Windows 8.

IE is an acronym for Internet Explorer.

[ ]

Menus, commands, dialogs, buttons in a dialog, and other items on the screen and keys

are enclosed in brackets.

Indicates Memory function support.

Indicates Recorder function support.

Indicates X-Y Recorder function support.

Indicates FFT Recorder function support.

Click: Press and quickly release the left button of the mouse.

Right click: Press and quickly release the right button of the mouse.

Double click: Quickly click the left button of the mouse twice.

Содержание MR8827




















































































































































































































































































































































































































































Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды

Hioki MR8827, Инструкция по эксплуатации

Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды