Hioki MR8827, Инструкция по эксплуатации

Страница: 363 / 436

358
File
18.5 File
Data Saving
Supported storage
media
CF card, built-in drive*, USB memory stick, internal RAM,
LAN (Model 9333 LAN Communicator)
Saved data Setting data, measurement data, analysis data, screen image, print image
waveform evaluation conditions, waveform evaluation areas
Save types • Setting data (.SET) (Only setting configurations can be saved to internal RAM)
•Measurement data
Binary format (.MEM, .REC, .FFT, .XYC), Text format (.TXT)
•Index
Memory division (.SEQ), Division save (.IDX)
•Screen image (.BMP)
•Print image (.BMP)
•Startup (STRATUP.SET)
•Waveform evaluation conditions (.ARE) (Saving of evaluation area + setting conditions)
•Waveform evaluation area (.BMP) (Saving of evaluation area)
• Arbitrary waveform data (.WFG) (when Model U8793 is installed)
• Generation program data (.FGP) (when Model U8793 is installed)
• Pulse pattern data (.PLS) (when Model MR8791 is installed))
File name entry Alphanumeric and Japanese characters
Save range
All range, between AB cursors
Data thinning save When saved in text format
Off, 1/2, 1/5, 1/10, 1/20, 1/50, 1/100, 1/200, 1/500, 1/1000
Division save
When saved in binary format
16 MB, 32 MB, 64 MB
Duplicate file name
handling
Auto: If a file with the same name exists, saves the file,
adding a 4-digit number at the beginning of the file name.
Serial: Saves the file, adding a 4-digit number at the beginning of the file name.
Overwrite: If a file with the same name exists, overwrites the file.
Error: If a file with the same name exists, an error message will be displayed.
Selection of blocks
to be saved
Saves the selected blocks when dividing the memory
Selection of
channels to be saved
Selects the channels to save (measurement data, calculation data)
Data Loading
Supported storage
media
CF card, built-in drive*, USB memory stick, internal RAM
Loadable data types Setting data, measurement data, analysis data, text comments, waveform evaluation
conditions, waveform evaluation area
Loadable data
formats
• Setting data (.SET) (Setting configurations can only be loaded to internal RAM)
•Measurement data
Binary format (.MEM, .REC, .FFT, .XYC), text comments (.TXT)
•Index
memory division (.SEQ), Division save (.IDX)
•Startup (STRATUP.SET)
•Waveform evaluation conditions (.ARE)
•Waveform evaluation area (.BMP)
• Arbitrary waveform data (when Model U8793 is installed), in binary format (.WFG),
in text format (.TFG)
• Generation program data (.FGP) (when Model U8793 is installed)
• Pulse pattern data (.PLS) (when Model MR8791 is installed)
Loading method New
* When Model U8330 SSD Unit is installed