Hioki MR8827, Инструкция по эксплуатации

Страница: 243 / 436

238
Operations Available From the [Memory Div] Sheet
• Waveforms can be recorded into individual blocks by dividing memory space into multiple blocks.
• You can record waveforms beginning at any block ( Start Block ), choose which blocks to display ( Display
Block
), or display multiple overlaid blocks (
Reference Block
).
• The maximum number of blocks for memory division depends on the installed memory board and
recording length (up to 1024 divisions).
• Triggered waveform data can be acquired continuously and recorded sequentially in specified blocks
(from the Start Block, for the specified Used Blocks). Dead time while displaying or printing (during
which triggers are ignored) can be minimized.
• Even if you do not use the Memory Division function, up to 16 blocks of data (depending on the
specified recording length) can be saved to each block so that previously recorded data can be selected
for display on the Waveform Screen.
Refer to “7.8 View Block Waveforms” (p. 137).
Normal
Memory Division
1 2 3 4 5 6
Reference Block
Display Block
The Reference Block can be displayed as an
overlay.
Dead time (not recorded)
Recording length
Recording length
Blocks
When the number of Used Blocks = 5
Start Block
1 2 3 4 5
When batch saving, an index file (SEQ) is created.
When reloading this file, all saved blocks can be
read at once.
Auto Save
Auto Print
Used Blocks
When saving manually, select whether to save all used blocks or just the
displayed block. (p. 88)