Hioki MR8827, Инструкция по эксплуатации

Страница: 104 / 436

99
Manage Files
6
(When the selected save type is [Wave Binary] )
Select whether to save divided files.
Move the cursor to [Division] .
Off Files are not divided when saved. If a file is too large, it
cannot be saved.
16M, 32M,
64M
Select the size for Divided Save.
Refer to “About divided saving” (p. 99).
(When the selected save type is [Text] )
Set the data thinning amount.
Move the cursor to [Save Thin] .
Off No data thinning (sub-sampling).
1/2 to 1/1000 Set the thinning amount (the fraction of the total data
to retain).
7
Select the channels to save.
Move the cursor to [Save Ch] .
Analog
Channels
Logic
Channels
Waveform Calculations
(When [Wave Calculation] is [On])
— Channel will not be saved.
○ Channel will be saved.
Reset Return to previous settings.
When saving settings data,
a settings file for automatic
loading of settings can be
created as follows: specify the
folder [HIOKI_MR8827] on the
CF card as the save location
folder and use [STARTUP] as
[Save Name]
.
Refer to “5.4 Automatically
Load Settings (Auto-setup
Function)” (p. 96).
8
Execute the save operation.
Select
[Exec] .
To cancel saving, select [Cancel] .
File name
The maximum number of characters for [Save Name] is 123. The maximum path length including file
name is 255 characters.
About divided saving
• Large quantities of waveform data can be divided and saved as multiple files if necessary.
• Saving divided data creates one or more waveform files and an index (IDX) file.
• Then by loading the IDX file, the data in the waveform file(s) is loaded as a batch.
Refer to “Batch Load of Waveform Data” (p. 95).
• Each file can be loaded as a separate waveform data file.
Other limitations
Text format data cannot be loaded on the instrument.
5
Save/Load Data and Manage Files