Hioki MR8827 Скачать руководство пользователя страница 398

Страница: 398 / 436

393

Self-Test (Self Diagnostics)

19.4 Self-Test (Self Diagnostics)

The following self-test checks are available.

Procedure

Press the

SYSTEM

key to open the System screen, and then select the

[init]

sheet.

Check the instrument's internal memory (ROM and RAM). The results will

be displayed on the screen. (p. 393)

Check printing and clean print heads. (p. 394), (p. 396)

Check the screen display (color check, gradation check).

(p. 394)

Check whether instrument keys are functioning correctly. (p. 395)

Check the system configuration. (p. 395)

19.4.1

ROM/RAM Check

This check tests the instrument's internal memory (ROM and RAM).

Performing a ROM/RAM check will erase measurement data.

Save measurement data to other media before performing the ROM/RAM check.

Move the cursor to

[ROM/RAM Check]

Select

[Exec]

The ROM/RAM check will start.

The following checks are performed in the sequence

shown.

Program ROM → Address bus → Backup RAM →

Work RAM → Video RAM → Storage RAM

Do not turn the power off during the check.

To cancel the check, press the

STOP

key.

The current check will be interrupted and the next one will

start.

All operation keys (except

STOP

key) are disabled during

execution of the check.

The judgment results appear when the checks finish.

: Normal

: Error

ABORT

: When a check is interrupted

If “NG” appears, ask to have the instrument repaired.

Press any key to return to the original screen.

Maintenance and Service

Содержание MR8827




















































































































































































































































































































































































































































Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды

Hioki MR8827, Инструкция по эксплуатации

Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды