Hioki MR8827, Инструкция по эксплуатации

Страница: 323 / 436

318
Perform Remote Operations on the Instrument (Use an Internet Browser)
Remote Operation
The instrument can be controlled from a remote location. (This remote operation is mainly intended for
monitoring the screen. If you want more nimble remote operation, use Model 9333 LAN Communicator.)
Remote Control Screen
Click
[Remote Control]
in the list of operations to open the screen.
The remote control screen is divided into the instrument display section and operation panel.
Operation panel
Operation panel
Instrument display
screen
Update screen
Zoom in or out
When auto-update is enabled, screen information is sent from the
instrument to the PC at regular intervals to keep the display updated.
Set display update speed.
Available settings:
Normal/Slow/Very Slow
Basic Operations
When you click a button on the operation panel, the instrument performs the same action is if the
corresponding key on the unit was pressed. However, simultaneously activating more than one button is
not possible. You can directly click inside the screen to move the flashing cursor onto the item or click a
GUI figure directly to set it.
The keys and controls on the instrument are active also during remote operation.
• Remote control may not be possible when JRE has not been installed. (p. 315)
• Printing may be interrupted if it occurs during remote operation. Set display update speed to [Slow]
or [Very Slow] .