Hioki MR8827 Скачать руководство пользователя страница 13

Страница: 13 / 436

Operation Precautions

Handling the Printer and Recording Paper

WARNING

The print head and surrounding metal parts can become hot. Be careful to avoid

touching these parts.

CAUTION

Be careful not to cut yourself with the paper cutter.

•

Please use only the specified recording paper. Using non-specified paper may not only result in

faulty printing, but printing may become impossible.

• If the recording paper is skewed on the roller, paper jams may result.

• Always use the paper cutter to cut the printed paper. Excessive paper dust can accumulate on the roller

if the paper is cut by the print head, which may result in paper jams or white streaks in the printing.

Storing Data Recordings

The recording paper is thermally and chemically sensitized. Observe the following precautions to

avoid paper discoloration and fading.

• To avoid discoloration, do not expose it to direct sunlight. Store below 40°C (104°F) and 90% RH.

• Store away from dew and damp places.

• Make photocopies of recording printouts that are to be handled or stored for legal purposes.

• If the thermal paper is exposed to an organic solvent such as alcohol or ketone, it may no longer

develop properly, and recorded data may fade. Pressure sensitive tapes such as flexible PVC

films and scotch tapes must be handled with care as they contain organic solvents.

• Also, the thermal recording paper is ruined by contact with wet Daizo copy paper.

Avoid exposure to direct

sunlight.

Avoid exposure to volatile

organic solvents like

alcohol, ethers, and

ketones.

Do not store thermal paper

above 40°C and 90% RH.

Avoid contact with

adhesive tapes like

soft vinyl chloride and

cellophane tape.

Avoid stacking with wet

Diazo copy paper.

Storing Recording Paper

• Store thermal paper where its temperature will not exceed 40°C (104°F).

• The paper will deteriorate if exposed to light for a long time, so do not remove rolls from their

wrappers until ready to use.Handling Media

Содержание MR8827




















































































































































































































































































































































































































































Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды

Hioki MR8827, Инструкция по эксплуатации

Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды