Hioki MR8827 Скачать руководство пользователя страница 311

Страница: 311 / 436

306

Setting Descriptions

Grid

Select the grid (graticule) type for the waveform screen.

Off

No grid displayed.

Dotted Line

Display a dotted-line grid.

(Default setting)

Solid Line

Display a solid-line grid.

Time Value

Display the time from the trigger point on the display.

Time

Display the time from the trigger point (unit is fixed).

(Default setting)

Time (60)

Display the time from the trigger point (sexagesimal (base-60) system).

div

Display the number of divisions (div) from the trigger point.

Date

Display time of waveform acquisition.

Sample Num

Display the number of data points from the trigger point.

•

During external sampling, the number of points is fixed.

• These settings affect the values read at the AB cursors.

Start Backup

Preserves measurement condition settings. If the power is turned off during

recording due to power outage or other reasons, the operation resumes

automatically when the power is restored.

When triggering is enabled, the awaiting-trigger state is activated.

Off

(Default setting)/On

• Valid only during recording.

• This function does not start automatically when the instrument is turned on.

Backlight

Saver

The screen blanks automatically after the specified period (minutes) with no key operation.

The screen reappears when any key is pressed.

Off

Disables the backlight saver function.

(Default setting)

The screen remains visible at all times.

(Setting the

time)

Setting range: 1 to 30 min (in whole minutes)

• When the screen is blanked by the backlight saver, pressing a key only

reactivates the backlight; the normal key function is ignored. Press the key

again for its normal function.

• Using the backlight saver conserves energy and extends the life of the backlight.

Содержание MR8827




















































































































































































































































































































































































































































Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды

Hioki MR8827, Инструкция по эксплуатации

Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды