Hioki MR8827 Скачать руководство пользователя страница 400

Страница: 400 / 436

395

Self-Test (Self Diagnostics)

19.4.4

Key Check

This check tests operation of the keys and jog/shuttle controls.

Move the cursor to

[Key Check]

The key check will not finish if there is

a problem that prevents even one of

the keys from being recognized. If this

occurs, press the

STOP

and

START

keys simultaneously to display the

previous screen.

There may be a malfunction in the

instrument, please request repairs.

If there is a problem with the

STOP

START

key, you cannot return to the

previous screen. Power the instrument

off and request repairs.

Select

[Exec]

Operation keys will be displayed.

Press each operation key once or more.

The corresponding key will be highlighted over.

Jog: Rotate to the left and right, one time or more in each direction.
Shuttle: Turn slowly all the way in each direction.

(The

START

key also functions as an LED light check key.)

The check is finished when you have operated all the keys.

To cancel the check, press the

START

and

STOP

keys

simultaneously

You will be returned to previous screen.

19.4.5

System Configuration Check

The list of installed options and other system information will be displayed in a separate window.

Move the cursor to

[System Information]

Select

[Exec].

The

[System Configuration]

List will be displayed.

To return to the previous screen, press any key.

Currently selected

interface

Internal memory

capacity

Model number, name,

resolution, sampling

rate and firmware

version no. of each

installed module (unit)

FPGA version no.

Board revision no.

Firmware version no.

Maintenance and Service

Содержание MR8827




















































































































































































































































































































































































































































Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды

Hioki MR8827, Инструкция по эксплуатации

Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды