Hioki MR8827, Инструкция по эксплуатации

Страница: 122 / 436

117
Printer Settings
9
Set the upper and lower limit value
Move the cursor to
[Up/Low Print]
.
<Print Example>
Upper and Lower Limit
Off Do not print upper and lower limits. (
Default
setting)
On Print upper and lower limits.
10
Set the zero-position comment
Move the cursor to [Zero-Pos Comment] .
<Print Example>
Comment
Off Print the channel number. (
Default setting)
On Print zero position comment.
•The comment is not printed for X-Y display or FFT.
• The zero-position comment is not printed when the
comment has not been set.
Refer to “8.1 Add Comments” (p. 140).
11
Select the counter print.
Move the cursor to [Print Counter] .
Off Do not print a counter. ( Default setting)
Date Print the date of printing and the waveform
acquisition count.
(Example: 04-8-1-0001)
Name Print the counter name and the waveform
acquisition count.
(Example: Device A-0001)
(When [Date] or [Name] is selected)
If you want to begin from an arbitrary count
Move the cursor to [Counter Num] , and set an arbitrary count.
Refer to “8.1.3 Alphanumeric Input” (p. 143).
The count is automatically cleared to zero when the instrument is powered on.
The count is increased by 1 each time a waveform is acquired. (Maximum count 9999)
(When [Name] is selected)
Enter a counter name.
Move the cursor to [Counter Name] , and enter a counter name (up to 10 characters).
Refer to “8.1.3 Alphanumeric Input” (p. 143).
<Example of Data and Counter>
<Example of Counter name and Counter>
04-8-1-0001
Date Counter Num
DeviceA-0001
Counter Name Counter Num
<Print Example>
6
Printing (
When Model U8350 Printer Unit is installed
)