Hioki MR8827 Скачать руководство пользователя страница 130

Страница: 130 / 436

125

Specify a Waveform Range (AB Cursor)

7.2 Specify a Waveform Range (AB Cursor)

When the waveform is shown as a time display, the range can be specified with the div cursor or trace

cursor.

The specified range will be used for file saving, printing, X-Y synthesis, and numerical calculation. The

range selection will be retained when the waveform display format is changed.

A cursor

B cursor

Cursor position

can be verified.

The general procedure is as follows.

Set AB cursors

Refer to “AB Cursor Settings” (p. 122).

Specify a range

•

For ﬁle saving

System screen -

[File Save]

sheet -

[Save Area]

, and then select

[A-B Wave]

Refer to “5.2.2 Automatically Save Waveforms” (p. 82) or “5.2.3 Save Data Selectively (SA VE

Key)” (p. 88).

•

For printing

System screen -

[Printer]

sheet -

[Slct Print Area]

, and then select

[A-B Wave]

Refer to “6.2 Auto-print Settings” (p. 109) or “6.3 Manual Printing With the PRINT Key (Selective

Printing)” (p. 112).

•

For X-Y synthesis

Status screen -

[Status]

sheet -

[Combo Area]

, and then select

[A-B Wave]

Refer to “7.1 Read Measurement Values (Using the AB Cursors)” (p. 122).

•

For numerical calculation

Status screen -

[Num Calc]

sheet -

[Calc Area]

, and then select

[A-B Wave]

Refer to “6.2 Auto-print Settings” (p. 109).

About reading measurement values and cursor types

Refer to “7.1 Read Measurement Values (Using the AB Cursors)” (p. 122).

Available range for AB cursor

The available range depends on the function.

•

Memory function: Recorded measurement data for one measurement

•

Recorder function: Up to the range of measurement data recorded during one measurement, or

up to the range of measurement data that can be recorded internally, starting at the point at which

measurement ended and going backwards in time.

The maximum measurement data that can be recorded internally is 80,000 divs.

avef
orm Screen Monit

oring and

Analysis

Содержание MR8827




















































































































































































































































































































































































































































Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды

Hioki MR8827, Инструкция по эксплуатации

Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды