manualshive.com logo in svg

Hioki MR8827, Инструкция по эксплуатации, Страница: 87 / 436

Поделиться
Скачать
Hioki MR8827 Скачать руководство пользователя страница 87

82

Save Data

5.2.2 

Automatically Save Waveforms

This function acquires measurement data for the recording length then saves the waveform data 

automatically. The save location and data to be saved must be selected before measurement starts.

Procedure

Press the 

SYSTEM

 key to open the System screen.  → 

[File Save]

 sheet

1 

Enable auto-save.

Move the cursor to 

[Auto Save]

, and select 

[On]

.

 

Default setting: Off (no automatic saving)

1
2
3
4

2 

Set the data to be saved.

Move the cursor to 

[Save Type]

.

Wave

Binary

Save waveform data in binary format.

(Data saved in binary format can only be 

loaded on this instrument.)

Wave

Text

Save waveform data in text format.

The data can be thinned out then saved.

(This data can be opened by a PC editor 

or spreadsheet software, but it cannot be 

reloaded on this instrument.)

3 

Set the save destination.

Move the cursor to 

[Save To]

, and select 

[Edit]

.

The Browse folders dialog box appears (at bottom right).  

Move the cursor to the storage media you want 

to save the data to and confirm the setting with 

[Confirm]

.

HDD

Automatically save the waveform data on the 

built-in drive.

(When Model U8330 SSD Unit is installed)

CF

Automatically save the waveform data on a CF 

card.

USB

Automatically save the waveform data on a USB 

memory stick.

LAN

Automatically save the waveform data on a PC 

connected via LAN.

Model 9333 LAN Communicator required.

When the root directory (topmost folder on the storage 

media) is selected, a folder named “HIOKI_MR8827” will be 

created automatically. (If the media was formatted by the 

instrument, the folder will already have been created.) This 

folder is then used as the save location.

To create a new folder to use as the save target, 

select 

[New Folder]

. When 

[LAN]

 is set as the save 

destination, 

[New Folder] 

is ignored and a folder 

named with the current date will be created.

Select media:

Up/down CURSOR

Open next lower 

folder level:

Right CURSOR

*

 

•

To save the waveform data on a 

PC connected via LAN

The 9333 LAN Communicator must be 

installed on the PC on which the data 

is to be saved. For more information 

about how to operate and configure 

the Model 9333 LAN Communicator, 

as well as install it on a PC, refer to the 

instruction manual of Model 9333 LAN 

Communicator.

 

•

When setting the save destination 

to 

[LAN]

You must first set the IP addresses of the 

unit and the PC connected via LAN. For 

more information about how to set the IP 

addresses, refer to (p. 310).

Содержание MR8827





















































































































































































































































































































































































































































Отзывы:

Нет отзывов