Hioki MR8827 Скачать руководство пользователя страница 124

Страница: 124 / 436

119

Miscellaneous Printing Functions

6.6.3

List Print

This function prints out function status information and channel setting information in list format.

The list settings are the same as for the List function.

Refer to “Print a list of settings” (p. 116).

Press the

PRINT

key at a screen other than the Waveform screen.

To stop printing before it has finished, press the

STOP

key.

The printed list contains the setting parameters for the acquired waveform data. The list content will not

change even if the settings were changed after the waveform data was acquired.

6.6.4

Text Comment Printing

A text document edited on a PC can be printed together with a waveform.

Create a text file using

[Notepad]

or another suitable application on the PC.

The maximum size of the text comment that can be imported to the instrument is 104 ×

200.

Print width will be adjusted to the widest line.

Press the

SYSTEM

key and set

[Text Comment]

on the

[Printer]

sheet.

Off

Text comment is not printed. (

Default setting)

Before Wave

Text comment is printed before waveform.

After Wave

Text comment is printed after waveform.

Press the

FILE

key and use the File screen to import the text file created on the PC into

the instrument.

Refer to “5.3 Load Data” (p. 93).

The text file content will be printed along with the waveform when printing.

Print Example: Positioning with regard to other print items

Upper and Lower limit value

Text comment

Zero position comment

Gauge

List

Numerical calculation results

Text comment

Gauge

Printing (

When Model U8350 Printer Unit is installed

)

Содержание MR8827




















































































































































































































































































































































































































































Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды

Hioki MR8827, Инструкция по эксплуатации

Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды