Hioki MR8827, Инструкция по эксплуатации, Страница: 98 / 436

93
Load Data
5.3 Load Data
Data saved on storage media or in the internal memory of the instrument can be reloaded.
Load Data Workflow
Before attempting to load data, make sure that the storage media is inserted and the loading target is
correctly specified.
Only settings and measurement data saved in binary format can be loaded on the instrument.
Waveform data
Insert the storage media.
Select data to be loaded.
(Extension: .MEM , .REC , .FFT ,
.XYC , .IDX , .SEQ )
Select [Load]
Select [Exec]
Load
Settings data
Insert the storage media.
Select data to be loaded.
(Extension: .SET )
Select [Load]
Select [Exec]
Load
Text comment
On Printer sheet,
set [Text Comment] to
[Before Wave] (or [After Wave] ).
Insert the storage media.
Select data to be loaded.
(Extension: .TXT )
Select [Load]
Select [Exec]
Load
Waveform evaluation area
Insert the storage media.
Select data to be loaded.
(Extension: .ARE , .BMP )
Select [Load]
Select [Exec]
Load
Waveform output data
Insert the storage media.
Select data to be loaded.
(Extension: . WFG , .TFG ,
.PLS , .FGP )
Specify the module and channel of
the loading target.
Select [Load]
Select [Exec]
Load
Refer to See “8.11 Register the Waveform in the U8793 ArbitraryWaveform Generator Unit” (page 182),
or the instruction manual of Models U8793, MR8790, and MR8791 regarding the detailed settings for
loading (registration) of pulse pattern data, arbitrary waveform data, program data.
5
Save/Load Data and Manage Files