Hioki MR8827, Инструкция по эксплуатации

Страница: 317 / 436

312
LAN Connection and Settings (Before Using FTP/Internet Browser/Command Communications)
LAN Setup Workflow
Press the
SYSTEM
key and bring up the
Communications
sheet. Make settings as outlined below to suit
your intended use.
Use the CURSOR keys to move the settings
cursor and use the F keys to select a value
for that setting.
Refer to “8.1.3 Alphanumeric Input” (p. 143).
For the details on each setting,
Refer to “Setting Details” (p. 311).
About the network
For IP address information and other details
about the network you are using, contact
your network administrator.
Intended use
Connecting the instrument to the
existing network
Connecting the instrument to the
computer directly
Connecting the instrument to the
network using the specified IP address
When you want to name the instrument,
set [Host Name] .
Settings when the
instrument and the
computer connects to the
same network
Set
[IP Address]
of the instrument. Set
[IP Address]
of the instrument.
Set [Subnet Mask] . Set [Subnet Mask] .
Settings when the
instrument connects to
the different network from
the computer network
(Useing the gateway)
Set [Gateway] to [On] Set [Gateway] to [Off]
Set the gateway [IP Address] .
Settings for remote
operation and data
acquisition using Model
9333 LAN Communicator
Set [LAN Communicator] to [On] . Set [LAN Communicator] to [On] .
Set IP address of [Data Server] . Set IP address of [Data Server] .
Connecting the
instrument
Execute [Reset] . Execute [Reset] .
Connect the straight-through cable.
Refer to “16.1.2” (p. 337).
Connect the crossover cable.
Refer to “16.1.2” (p. 337).