Hioki MR8827 Скачать руководство пользователя страница 320

Страница: 320 / 436

315

Perform Remote Operations on the Instrument (Use an Internet Browser)

16.2

Perform Remote Operations on the Instrument

(Use an Internet Browser)

You can perform remote operations on the instrument from a PC using an Internet browser.

Attempting to control the instrument simultaneously from multiple PCs may result in unintended

operation. Use only one PC to perform remote operations.

To use an Internet browser, the instrument must be properly set up and connected via LAN cable to the

PC. (p. 310), (p. 313)

Microsoft Internet Explorer

Version 5 or later is recommended. Set the security level to “Medium.” If

[REMOTE CONTROL] and [MEMORY DATA GET] do not work, install JRE from the application disc.

Turn off the pop-up blocker.

Installing JRE

Insert the application disc (CD) into the CD-ROM drive.

The top page appears automatically.

If it does not appear, open the “index.htm” file with your Web browser.

Selects the display language.

Click the

English

icon.

Click on the

[JRE installation]

icon.

Click on the

[Install]

icon, then follow the prompts that appear to complete the installation.

16.2.1

HTTP Settings on the Instrument

Procedure

Press the

SYSTEM

key to open the System screen, and then select the

[Interface]

sheet.

First, set the “LAN Communicator” setting to

[Off]

Choose authorization settings.

Move the cursor to

[Authorization]

Off

Web server authentication not used. (Default setting)

Web server authentication used.

The user name and password for

authentication are the same for

the Internet browser and for FTP.

(When

[On]

is selected)

Set the user name and password for authentication.

Move the cursor to

[User Name]

and

[Password]

and

enter suitable information.

Refer to “8.1.3 Alphanumeric Input” (p. 143) or

“Authorization User Name and Password” (p. 311).

Apply the settings.

Move the cursor to

[Reset].

Select

[Reflect Set].

The “LAN was reconnected” message will appear at the

bottom of the screen.

Connect to a PC

Содержание MR8827




















































































































































































































































































































































































































































Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды

Hioki MR8827, Инструкция по эксплуатации

Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды